> Exhaust Gasket
> Cylinder Head Gasket
> Exhaust Mainfold Gasket
> Exhaust Pipe Gasket
> Gaskets
> Compression Sheets
> Braided Packings
 
 Do you want to know more about Zinotak?
detail>>
Contact us
Add:Kandun Street,Cixi,Zhejiang,China
Tel:0086-574-63281040
Fax:4008266163*01620
Website:www.zinotak.com
Email: sales@zinotak.com           service@zinotak.com
Home >Gaskets
Series: Exhaust Joint Gaskets
Exhaust Joint Gasket is pressed by metal mesh and high temperature graphite tape ,it is with good compression resilient. Meanwhile it is the ideal choice for automotive exhaust system dedicated seals.
 
 
Series: Muffler Gaskets
It is suitable to kinds of the muffler gasket and cylinder heads gasket. The product has excellent performance in dilatability, sealing equality and long life etc., Mainly applied in automobile farming machine, motorcycle and engineering etc., it is also can be used in high strength gaskets ,muffler gaskets and cylinder gaskets etc.
 
 
Series: Graphite Packing Rings
Graphite packing ring with metal is pressed by pure graphite tape . In general ,a square cross-section can also be made, If the customer required, we also can be made O-shaped,conical shaped and V-shaped. Conical shaped and V-shaped is more suitable for high parts of seal.
 
 
Series: Expanded Graphite Gaskets
Without reinforced metal inside. Standard grade: 99% pure exfoliated graphite. Widest temperature range. Very easy to cut, although large gaskets may need support carriage and fitting.
 
 
Series: Spiral Wound Gaskets
Wide range of applicable working condition,high temperature and high pressure resistance. applicable to super low temperature and vacuum condition.chemical resistant gasket is available under various medium,through change of composition of gasket.
 
 
Series: Metal Jacketed Gaskets
Metallic gaskets can come in different styles like; double jacket, single jacket, or solid metal. Soft compressible filler material can be flexible graphite, PTFE, or non-asbestos compressed sheet type. The design of a metal jacketed gasket also may require different shapes and the styles mentioned above can be made to a variety. zinotak jacketed gaskets are normally manufactured with a high temperature filler. The standard filler is normally sufficient for applications up to 900º F. Other soft fillers are available for higher temperatures or special applications. The choice of the metal used for the jacketed part of the gasket would depend upon the corrosive conditions being encountered.
 
 
Series: Corrugated Gaskets
The corrugated metal gaskets have been proven to be both reliable and cost effective for the application on flanges and heads where boat loading is sufficient. Corrugated metal is covered with graphite, ceramic or PTFE layer. An additional finishing layer is applied depending on the requirements of the medium to be sealed. The gaskets with soft layer on both sides are used in low pressure applications in large diameter flue gas ducts at high temperatures
 
 
Series: Ring Joint Gaskets
The non-asbestos gasket is cut from non-asbestos rubber sheets. The non-asbestos sheet is made from asbestos fiber, Nitrile rubber, filling material and dye, compressed and calendered under high temperature and pressure into a sheet form.Normal colour: Black, blue or green, yellow .etc.
 
 
Series: Non-asbestos Gaskets
The non-asbestos gasket is cut from non-asbestos rubber sheets. The non-asbestos sheet is made from asbestos fiber, Nitrile rubber, filling material and dye, compressed and calendered under high temperature and pressure into a sheet form.Normal colour: Black, blue or green, yellow .etc.
 
 
 
Home  Back  1   2   Next   End 
Copyright 2003-2012 © Cixi Zinotak Sealing Manufacture Co.,Ltd.   All Rights Reserved   Tel:86 574 63281040    Fax:86 4008 266163-01620
浙ICP备17050986号