> Gaskets
> Exhaust Joint Gaskets
> Muffler Gaskets
> Graphite Packing Rings
> Expanded Graphite Gaskets
> Spiral Wound Gaskets
> Metal Jacketed Gaskets
> Corrugated Gaskets
> Ring Joint Gaskets
> Non-asbestos Gaskets
> Asbestos Gaskets
> Rubber Gaskets
> PTFE Gaskets
> Tape Gaskets
> Compression Sheets
> Braided Packings
 
 Do you want to know more about Zinotak?
detail>>
Contact us
Add:Kandun Street,Cixi,Zhejiang,China
Tel:0086-574-63281040
Fax:4008266163*01620
Website:www.zinotak.com
Email: sales@zinotak.com           service@zinotak.com
Home >Graphite Packing Rings>
Name: Pure Graphite Packing Ring (ZT-G201)
Graphite packing ring with metal is pressed by pure graphite tape . In general ,a square cross-section can also be made, If the customer required, we also can be made O-shaped,conical shaped and V-shaped. Conical shaped and V-shaped is more suitable for high parts of seal.
>> more detail
 
 
Name: Graphite Packing Ring With Wire Mesh (ZT-G202)
Graphite packing ring with metal is pressed by pure graphite tape and 304ss tape/ 304ss wire / nickel foil . It mainly can improve stress resistance. In order to prevent the filler oxidized slowly, we always design the packing ring is with stainless steel tap and bottom graphite ring.Inhibition type graphite packing ring is pressed by graphite sheet with low sulfur and zinc powder, which can be effectively prevent the fill material sulfur corrosion stem. In general ,a square cross-section can also be made, If the customer required, we also can be made O-shaped,conical shaped and V-shaped. Conical shaped and V-shaped is more suitable for high parts of seal.
>> more detail
 
 
Name: Abnormity Graphite Packing Ring (ZT-G203)
Graphite packing ring with metal is pressed by pure graphite tape . In general ,a square cross-section can also be made, If the customer required, we also can be made O-shaped,conical shaped and V-shaped. Conical shaped and V-shaped is more suitable for high parts of seal
>> more detail
 
 
 
Home  Back  1   Next   End 
Copyright 2003-2012 © Cixi Zinotak Sealing Manufacture Co.,Ltd.   All Rights Reserved   Tel:86 574 63281040    Fax:86 4008 266163-01620
浙ICP备17050986号